Showing posts with label problem. Show all posts
Showing posts with label problem. Show all posts

Saturday, January 17, 2009

Technical details of BSNL EVDO service

In BSNL EVDO service you don't get a public IP. You will get a static shared IP.
Typically there is no problem with this but it will create problems except in cases
where public IP is important.
For eg: Rapidshare has a download limit per IP. Since you are sharing same IP
with a lot of other EVDO users, you may not be able to download from Rapidshare.
Currently there are limited EVDO connections but if the EDVO connections are
increased BSNL will allow public IP.

Tips for speeding up your EVDO connection

Sometimes the EVDO connection speed will be slow.This may happen for different reasons.
First: There could be weak signal in your area
Second: There maynot be EVDO coverage in your BSNL network antenna.
Third: Also if there are too many customers connecting to a specific BSNL network antenna.

TO overcome this,experiment positioning the card at different places.
Also turn the antenna and see whether signal strength improves.

Wednesday, January 7, 2009

Changing from pppoe to bridge connection to get rid of Disconnecting Problems

If your broad band is creating troubles to you by not connecting properly then you must change your connection mode from pppoe to bridge mode.To do this switch on your modem and open internet explorer and type 192.168.1.1 and press enter.Then you will be asked for username and password.Enter admin for both username and password and enter.Then click on advanced setup which is on left side of the webpage, then you will get some options under it. Click on WAN option then you will see a table then see under protocol, you will find all are in bridge except the first one which is in pppoe. Then click on the edit icon which is beside pppoe protocol.Then click next and remember dont change any values, then you will be asked to select the type of network protocol. There you select bridging and click next and then go on clicking next until you find save.Then click save and then click save/reboot. Remember not to change any values.
please leave a comment......................